Scan List Selection

(Conventional Personality, Features)

Selects which Scan List is used by the radio while operating in Scan Mode for the current Conventional Personality. This Scan List then determines which callers the radio scans for (actively listens for), and considers unmuting to the current Conventional channel.

	When the Analog Flat Audio field is Enabled, this field must be set to "None"; otherwise, it becomes invalid. Therefore both features may not be enabled on the same Personality.
	When the Mixed Vote Scan Enable field is Enabled for the current Personality, this field must be set to a "Conventional" Scan Type; otherwise, it becomes invalid.
	When the referenced Conventional System selected in the ASTRO System field is a "DVRS" System Type, this field must be set to "None"; otherwise, it becomes invalid.
	The CPS considers this selection invalid when this personality is LTE Broadband-enabled, and this selected Scan List has any Scan List Member Channels having ... their Conventional Personality's LTE Interference Frequency Present field set to "Enabled", or their Trunking System's LTE Interference Frequency Present field is "True", or their Trunking System's Coverage Type field set to "Inter-WACN Roaming". A Conventional channel is LTE enabled when the Personality's referenced ASTRO - Conventional System has a referenced Data Profile having a Data Profile Type selection equal to "Conventional & Broadband" or "Broadband-Only", and when that Data Profile's Broadband Source is "Internal LTE Modem".
	The CPS considers this selection invalid when the current Conventional Personality's LTE Interference Frequency Present field is Enabled, and this Scan List Selection is referencing a Scan List with a Designated Data Member LTE Broadband-enabled channel. A conventional channel is LTE enabled when the Personality's referenced ASTRO - Conventional System has a referenced Data Profile having a Data Profile Type equal to "Conventional & Broadband" or "Broadband-Only", and when that Data Profile's Broadband Source field is "Internal LTE Modem".

	Scan List and Scan List Member functionality are defined in the Scan List Window.
	Only Scan Lists having the "Conventional" or "Talkgroup" selection in the Scan Type field are valid Scan List Selections for the current Conventional Personality.
	Scan List editing is radio-user initiated with a Scan List Programming switch-toggle, a Scan List menu-selection, or a long keypress duration of a Scan button-press.

When the Remote Site Interface System field in the referenced Conventional System is disabled;

IF enabled, THEN the Rx Voice / Signal Type field must be set to "ASTRO", and

this Scan List Selection must be "None"; ELSE, this field becomes invalid.

Go to the Features Page